Publications
Publication Information
| Title | Overview of Torus Magnet Coil Production at Fermilab for the Jefferson Lab 12 GeV Hall B Upgrade | ||
| Authors | G. Velev,S. Krave,A. Makarov,F. Nobrega,O. Kiemschies,B. Robotham,Latifa Elouadrhiri,Cesar Luongo,David Kashy,Mark Wiseman | ||
| JLAB number | JLAB-ACE-16-2151 | ||
| LANL number | (None) | ||
| Other number | DOE/OR/23177-3626 | ||
| Document Type(s) | (Meeting) | ||
| Supported by U.S. Naval Research: | No | ||
| Supported by Jefferson Lab LDRD Funding: | No | ||
| Funding Source: | Nuclear Physics (NP) | ||
| Other Funding: | AC02-07CH11359 | ||
|
Meeting Paper compiled for International Conference on Magnet Technology (MT24) Journal Compiled for IEEE Transactions in Applied Superconductivity Volume 26 Issue 4 Page(s) 4102705 Refereed Proceedings MT-24 Edited By Luisa Chiesa IEEE (2016) Refereed Page(s) 4102705 | |||
| Publication Abstract: | Fermi National Accelerator Laboratory (Fermilab) fabricated the torus magnet coils for the 12 GeV Hall B upgrade at Jefferson Laboratory (JLab). The production consisted of 6 large superconducting coils for the magnet and 2 spare coils. The toroidal field coils are approximately 2 m x 4 m x 5 cm thick. Each of these coils consists of two layers, each of which has 117 turns of copper-stabilized superconducting cable which will be conduction cooled by helium gas. Due to the size of the coils and their unique geometry, Fermilab designed and fabricated specialized tooling and, together with JLab, developed unique manufacturing techniques for each stage of the coil construction. This paper describes the tooling and manufacturing techniques required to produce the six production coils and two spare coils needed by the project. | ||
| Experiment Numbers: | other | ||
| Group: | Engineering Div Mgmt | ||
| Document: | |||
| DOI: | http://dx.doi.org/10.1109/TASC.2016.2533264 | ||
| Accepted Manuscript: | |||
| Supporting Documents: | |||
|
|||
| Supporting Datasets: | |||